Is It The Right Time To Replace The Faucet?

To keep the household functioning adequately, quality faucet and sink fixtures are imperative. They are used on a regular basis in the bathroom for washing faces and brushing teeth and in the kitchen for tasks like washing hands and dishes. When a faucet or sink fixture starts malfunctioning, it can simply put a complete halt on some of the routine indispensable tasks in a home. It is crucial to know and understand why and when is the right time to get faucet or sink fixtures replaced.

There may be an array of instances that it is essential to the faucet in the bathroom or kitchen in your home. Faucets are utilized daily and can suffer from wear and tear over a course of time. Instances from wear and tear that result in faucet replacement include broken seals, broken O-ring, broken nozzles and leaks.

Signs of faucet damage

Faucet damage can be in multiple ways.

  • Corrosion is one of the primary causes of a broken faucet. Corrosion on a faucet can lead to water deposits and minerals not being properly cleaned off. It can eventually happen to every faucet, however, if the faucet is not kept clean, it can result in small holes all over the fixture.
  • Even though the faucet is turned off and the faucet is still letting water through is another sign of a damaged faucet. Leaks can come from broken seals or broken nozzles for instance.

Calling a plumbing expert to get the faucet or sink fixtures replaced is recommended to get the job done professionally!

Do Water Pipes Need Insulation?

For most homeowners, whether to insulate home’s hot water pipes is a fairly easy decision. When you can purchase effective insulating pipe sleeves for a few feet per dollar, it’s hard to resist the simple energy savings that will pay off for years. But not all homeowners know about this easy efficiency booster, or the reasons why you might want to insulate your cold water pipes, as well.

Some Like It Hot

First, insulating your hot water pipes will help keep the hot water hot. If you have a traditional tank water heater, you’re already paying to keep that hot water on standby. With the benefit of pipe insulation, the hot water waiting in your pipes will cool down slower.

Quality insulation can add a few degrees to the actual temperature of household water, so if you like things, especially hot when you’re showering or washing the dishes, pipe insulation is well worth the expense. This also helps save water, because it will shorten the time it takes for the water coming out of your fixtures to reach your desired temperature.

What About Cold Water Pipes?

There’s no heat to preserve in your cold water pipes, so it might not immediately make sense to insulate them. But if you’re already going to the trouble of insulating your hot water pipes, adding insulation to their cold water compatriots should only add a few bucks in materials to the average house and there are some real benefits.

If your cold water pipes run through any area of your home that lacks climate control, whether it’s an unfinished basement or a section of pipe exposed to the outdoor elements, you run the risk of pipes freezing in winter. This can cause a big mess and an even bigger repair expense. But cheap, simple insulation can help prevent this from happening.

During the summer, these sections of pipe may also be exposed to outdoor heat, which may transfer to your cold water supply. Unless you want your cold water tap pouring warm or even hot water all summer, pipe insulation can help you here, as well.

Another benefit of insulating your cold water pipes is avoiding condensation. In high-humidity environments, metal pipes filled with cold water will become covered in condensation. As these droplets collect, they’ll fall into whatever lies beneath. If you’re storing priceless keepsakes in your basement beneath uninsulated water pipes, this moisture could produce destructive results.

If you’re getting into this project and discover you need the expertise of a pro, get in touch with a plumbing expert!

A Guide to Ensure The Proficiency of Plumbing System

Plumbing has been with us since Roman times, but today’s homes have a lavish supply of hot and cold water on demand, thanks to modern plumbing systems. The principles are simple — pressure and valves — but if they fail, the household may be faced with a soggy mess. When this happens, act quickly to avert major problems.

Smart homeowners know how to spot and resolve small plumbing problems before they become major issues. Help your plumbing stay dry with these tips:

Keep an eye out for trouble

When it comes to plumbing, little leaks can lead to big problems. Be alert to signs of impending plumbing failures: Leaking faucets, damp cabinets, rocking toilets or dripping refrigerators all signal problems that need prompt attention.

Repair problems early

A leaking faucet isn’t just annoying; the moisture it releases puts wear on sink fixtures and can encourage the growth of mold and mildew. Stay on top of problems to keep the household clean and dry.

Shutting off appliances

Similarly, know how to shut off water to sinks, toilets, washing machines and water-using appliances like the refrigerator’s icemaker. Should they misbehave, knowing the location of the shut-off valve will save the day and a lot of wet cleanups.

When cold weather strikes, go into action

Open the cabinets beneath sinks and bathroom fixtures; warmer household air will help prevent the pipes inside from freezing. Opening taps to a bare trickle keeps water flowing and avoids a frozen blockage.

Call a licensed plumbing expert if your efforts are unsuccessful!

Common Heating Myths – Misconceptions Cleared

To stay warm and comfortable indoors is the goal in the winter unless you are away on vacation skiing. Save your money, energy and comfort simply by steering clear of the following home heating myths.

  • All new home are inexpensive to heat

If you have bought a new home recently, you might be thinking of low heating costs, which is, unfortunately, wrong. Not every new home is built with the consideration of energy efficiency. Despite the energy and construction codes, new buildings are sometimes still under-insulated and not completely sealed.

  • Using space heaters will save more money than a gas heating unit

Almost every space heater uses electricity to run, meaning that the more heaters the more often you use them, resulting in higher electricity bills. In contrast to natural gas, electricity bills actually tend to be expensive and less efficient. So, if you are worried about spending a lot on heating with a gas furnace, rest assured that it will actually be most cost efficient and comfortable than space heaters.

  • Setting the thermostat to a higher temperature will heat the home quicker

Most people are tempted to raise the temperature on the thermostat when it is particularly cold outside. But remember, it will not heat the home quickly. Numerous home furnaces apart from multi-stage units, run at full capacity regardless of how the temperature is set on the thermostat. Keeping the thermostat set to the temperature actually required will certainly avoid getting uncomfortably hot and save on the bills significantly.

Getting acquainted with hydro jetting

The machine that is used to pressurize the water adequately and to produce a powerful stream to clear debris, mud, dirt and years of build-up of minerals and grease in the drain while it moves forward is known as hydro jetting. It is completely different from a cable drain cleaning or snaking machine, which is being used by several plumbers.

When Do You Need Hydro Jetting?

There are a number of times when using a cable drain cleaning or snaking machine proves to be incompetent to get rid of drain clogs. This is when hydro jetting machine steps in. Cable drain or snaking machines are often not proficient enough to penetrate when it comes to clean a several hundred feet of the drain pipe, however, a hydro jetting machine work wonders over there.

In addition, these machines are capable enough to even to chuck out a wide range of bacterial issues at home that often results in causing bad odors from drain pipes. To experience the best of hydro jetting efficiency, make certain you get connected with a licensed plumbing service provider, having a team of experienced plumbers.

No matter whether it is a residential or commercial premises, skilled plumbing technicians are proficient enough to deliver the most preferred results effortlessly!

How are Emergency Plumbers Different from Regular Plumbers?

Emergency plumbers are one of the notable unsung heroes who come to you in your hour of deepest need. Generally, a plumbing emergency happens during odd hours, and you could not wait till decent hours as severe damage could happen till then. So, emergency plumbers will come to your home and fix the issue against some charge.

Here regular plumbers who install fixtures are very easy to find but the one who come to fix horrible messes during odd hours are not easy to find. These plumbers will clean up that mess in your bathroom and put things back in working order, and they do it all at hours because emergencies do not have a time frame.

But again, homeowners need to be extra careful  when they call emergency plumbers for help. You must hire experienced and professional plumbers to be assured that your home is in safe hand. There are a few things you must be careful about and notice. For instance, when they finally show up at your doorstep for help, notice whether they are friendly and professional? Are they smiling even though it is so late and messy? Will they give you straight answers and quotes right away? Are they willing to put in writing for you? A good plumbing contractor will always talk to you in friendly and must be straightforward. If not, see the red flags raised.

Significance of Hiring a Plumber to Inspect Your New Home

It is very important to get your new home inspect by a professional plumber before buying it. It is very easy for both the current and previous owner to have forgotten some small repairs, which may get worse with time, and demand expensive repair in the future. It is possible that you check the faucets, leaks, but you also need to inspect under the house plumbing system like sewer lines, heater pipes, etc.

Therefore, here are a plumber in your new home must inspect some areas:

The sewer line

When the sewer lines are clogged or busted, problems such as breaks, ruptures, leaks, flood etc can occur. As the sewer or septic lines are under ground, not many are  interested in digging ip the entire length  of the pipe to detect the problem. It will definitely ruin your yard, sooner or later.

Many reputable plumbing companies perform video pipe repair. They inspect the pipe with a long tube camera, check problem, and then do very precise dig, if required.

Detect Leaks

A leak under your kitchen sink or toilet is easy to fix, but finding a leak inside your floor is not easy. Such leaks problems get worse with time, and can damage your property severely.

Water Heater Inspection

If you’re buying a furnished home, it is advisable to get the water heaters inspected. Some water heaters can explode if  problems persist. This is dangerous, and can cause flooding or injury.

How to Clean a Clogged Drain Like a Pro Plumber?

If you notice standing water in your bathtub or kitchen sink draining very slowly, then probably your drains get clogged. Fortunately, if caught early , you can clear a clogged drain using common household items such as hot water, vinegar, baking soda and more.

Following are some simple ways through which you can clean any clogged drain just like a professional plumber:

  • You need to collect household cleaning items to open the drain. Vinegar is widely used for clogged train. You can also use lemon juice, baking soda, salt or borax, which is a multipurpose cleanser.
  • Pour vinegar and other cleaning agents down the drain. This mixture will foam up on its own as the chemical reaction takes place. You can make cleaning agent by mixing vinegar and baking soda, lemon juice and baking soda, or salt, borax and vinegar.
  • Close the drain or cover it with steaming hot cloth. Keep the drain closed for 30 minutes.
  • Use a small sink size plunger to agitate the clogged-up material to create a seal and push up and down on the rubber base of the plunger.
  • Use a hanger to pull out the clog.
  • Flush the drain with hot water.

Repeat the process is water is draining slowly. If you do not have time, or cannot do it correctly, it is advisable to hire professional plumber to fix clogged drains in hassle-free way.